Malco SH3V 18 oz Sheet Metal Setting Hammer – VINYL GRIP | One-Piece Forged I-Beam | Beveled Face & Pein | Recoil-Minimizing Molded Grip | HVAC, Roofing & Sheet Metal | Made in USA
12 sold in last 24 hours
- RECOIL-MINIMIZING, VINYL GRIP, NON-SLIP, AND CONSISTENT FROM THE FIRST STRIKE: The SH3V's molded-on vinyl grip is comfortable and non-slip from day one. The vinyl construction absorbs recoil on every strike, keeping your hand from fatiguing through a long day of setting sheet metal seams, driving cleats, or working ductwork on a commercial job. It doesn't change over time. It doesn't require break-in. What you feel the first time is what you get every time.
- ONE-PIECE FORGED I-BEAM CONSTRUCTION: The SH3V is forged as a single piece in an I-beam profile, so the head and handle are structurally the same component. There's no separate handle to loosen, no joint between head and neck to crack under repeated impact. Each section is individually hardened and tempered for strength and resilience, giving you a precisely balanced 18 oz striking weight that holds up under the daily demands of professional sheet metal work.
- FULLY POLISHED CORROSION RESISTANT BEVELED FACE & PEIN, WON'T MAR SHEET METAL SURFACES: The 7/8-inch beveled face and matching pein are fully polished and corrosion resistant, holding up in outdoor, humid, and high-use environments without rusting or pitting. The polished finish reduces the risk of marring painted or coated sheet metal surfaces on contact an important feature for finished roofing panels, coated fascia, and galvanized ductwork where surface damage leads to rework or callbacks.
- BUILT FOR HVAC TECHNICIANS, SHEET METAL WORKERS & ROOFERS WHO HAMMER EVERY DAY: The SH3V is the right choice for anyone who wants consistent grip performance in any weather or glove situation without waiting for leather to break in. At 11-3/4 inches overall and 18 oz, the balance is right for setting standing seam panels, driving cleats, working duct runs, and general sheet metal fabrication. It goes in the tool belt or bag and comes out ready to work, every job, every season.
- MADE IN USA: Malco's SH3 line has been in daily use by HVAC and sheet metal tradespeople for decades. The construction that made the leather version a career tool carries over to the vinyl grip model with the same forged I-beam body, same hardened and tempered head sections, same corrosion-resistant finish. Prefer the leather version? The SH3 with leather grip is also available.
Tags |
Estimated shipping
Select a product to estimate shipping.The Setting Hammer Other Brands Are Measured Against
When sheet metal pros talk about a setting hammer that just works, they're talking about Malco's Sheet Metal Setting Hammer. With its one-piece forged I-beam construction, individually hardened head sections, and full-polished beveled face and pein, this 18 oz. setting hammer delivers the balance, durability, and striking precision that roofing contractors, HVAC installers, and ductwork fabricators have relied on for years.
Engineered for the job site
At 11-3/4 inches overall and precisely balanced at 18 oz., the SH3V gives you controlled striking power whether you're driving cleats, setting standing seam panels, or working duct flanges. The 7/8-inch beveled face and matching pein are corrosion-resistant and won't mar polished or coated metal surfaces, keeping your work looking professional.
Minimal Recoil
The SH3V model is made with a molded on vinyl grip. The grip helps minimize recoil, while also staying comfortable and durable when in use.
Made in USA
Every Malco SH3V is made in the United States to exacting tolerances. This is a professional-grade tool built for a career of hard use — not a DIY weekend item. If you're in the trade and you want a setting hammer you'll never need to replace, this is it.
Unlike two-piece hammers that can loosen or break at the neck, the SH3V's single-forged I-beam head and handle deliver unmatched structural integrity. Built to handle the daily demands of professional sheet metal work, roofing, and HVAC duct installation.
Molded-on vinyl grips minimize recoil and offer excellent comfort, non-slip gripping and durability.
INDIVIDUALLY HARDENED & TEMPERED HEAD SECTIONS: Each section of the hammer is independently hardened and tempered, giving you a precisely balanced 18 oz striking weight with the resilience to absorb repeated impact without deforming.
FULL-POLISHED BEVELED FACE & PEIN, CORROSION RESISTANT: The highly polished, beveled 7/8-inch face and pein resist rust and corrosion even in outdoor or high-humidity job site conditions. The smooth finish reduces marring on sheet metal surfaces, so your work stays clean and professional.
THE INDUSTRY STANDARD: Trusted by professional roofers, HVAC technicians, and sheet metal workers across North America. At 11-3/4 inches overall length and perfectly balanced at 18 oz., the SH3 is the setting hammer other brands are measured against.
Product details
| Main Specification | |
|---|---|
| 주요 특징 | Malco |
| 단위 수 | 1 개 |
| 손잡이 물자 | 제품 정보 |
| 맨 위 작풍 | Beveled |
| 맨 위 물자 | Alloy Steel |
| 주요 특징 | Malco |
| UPC의 | 686046528243 |
| 상품번호 | 1명 1명 |
| 색상 : | 한국어 |
| Grip 유형 | Vinyl |
| 글로벌 무역 식별 번호 | 00686046528243 |
| 제품 무게 | 2.4 온스 |
| Product information | |
| 팩의 수 | 1명 1명 |
| Technical Details | |
| 제조업체 부품 번호 | SH3V |
| Item details | |
| 모델 번호 | SH3V |
| 품목 유형 이름 | Hammer |
| 제조업체 보증 Description | 한정된 일생 |
| Style | |
| 작풍 이름 | Vinyl Grip |
| Others | |
| 제품 유형 | Hammer |