Sworker 5Pcs Long Carbide Burr Set 1/4" Shank Total L 6.2" Die Grinder Bits Rotary Rasp Attachment Cut Port Grind Metal Cast Iron Steel Aluminum Cylinder Head Engine Intake Exhaust Manifold Tight Area
12 sold in last 24 hours
- 5 Pcs long carbide burr set 1/4" shank total length 6.22", head dia 8mm and 10mm, 1 slotted plastic box with hanger and 1 manual.
- Bent Risk! The tungsten carbide burr bits must remain in contact with the workpiece as long as the tool is running or turning on or turning off moment. Failure to observe this procedure may result in burr shank bending and an increased injuries risk. If the continuous contact between the bits and the workpiece is not guaranteed, the max idling speeds should not be exceeded.
- Perfect for tight and hard-to-reach areas than grinding discs grind wheel. Double cut produces a finer finish than single cut and reduces the size of the chips.
- Long shank carbide burrs bits perfect for deburring smoothing grinding porting cast iron steel aluminum cylinder head engine intake exhaust manifold.
- Very sharp, aggressive, tough, well-balanced and durable. 5 years returnless replacement.
Tags |
Estimated shipping
Select a product to estimate shipping.Sworker 5 Pcs Long Shank Carbide Burrs Shank Dia.=1/4", Head Dia.=8mm to 10mm, Total L. 6.22", 1 Clamshell Plastic Box with Hook and 1 Manual.
1. In general, burrs are used counter-rotationally or with a swinging motion. Pass the tool rapidly and lightly over the workpiece in the direction of rotation to achieve fine finishes and chamfers.
2. Don't apply too much pressure on the rotary tool, multiple light passes are better than a single deep one. Let the speed do the work. Do not exceed the max idling and application speed.
3. Clamping more shank depth of the burrs bits, inserting the shank of bits to the bottom of clamping is optimal. If you have to clamp the less shank, please low the rotary tool rotation speed.
4. Use only 1/4" rigid clamp system(collect and nut). Not be used for 6mm collect and nut of rotary tools. The high-speed rotary tools are optimal.
5. Don't sink the carbide burr for more than 1/3 of its periphery. Recommendation for tools drives: 1/4" shank from 300W, for coarse cuts, 500W+ and short shank burrs are optimal.
6. Avoid impact loads, otherwise the parts teeth will break off, shank will bend. For soft materials, such as aluminum, use a lubricant to reduce debris clogging. Use water as lubricant for glass.
7. Avoid lifting the burr away from the workpiece when starting, operating and stopping the tool, if your rotary tool works at a high speed. Using a foot switch is an excellent solution.
8. Always wear ear, eye, face protection and safety gloves. Grip the rotary tool firmly with both hands and use a swinging motion to minimizes the risk of kickback or wobble or sudden movement.
Notes: Bent Risk
The tungsten carbide burr bits must remain in contact with the workpiece as long as the tool is running or turning on or turning off moment. Failure to observe this procedure may result in burr shank bent and an increased injuries risk. If the continuous contact between the bits and the workpiece is not guaranteed, the max idling speeds should not be exceeded. Max idling speed without contact to workpiece: Head Dia.8mm≤6000RPM, Head Dia.10mm≤4000RPM, Max application speed with contact to workpiece: Head Dia.8mm≤11000RPM, Head Dia.10mm≤9000RPM.
Product details
| Main Specification | |
|---|---|
| 제품 정보 | · or 공 건조 실린더 or 볼 노즈드 트리 or ball-nosed-cone. |
| 관련 제품 | 5 Pcs long burrs 1/4" shank Tot. L 6.22" or 1 plastic box and 1 manual. |
| 크기 (mm) | 5 개 or 1/4x6.2"Shank |
| 주요 특징 | 사이트맵 |
| 제품 정보 | 더블 컷 |
| 주요 특징 | 사이트맵 |
| 품목 포장 양 | 1명 1명 |
| 힘 근원 | 로터리 콜릿 도구에서 최고의 (높은 RPM). 낮은 RPM 드릴/드릴 프레스에 있는 Poor. |
| 제품 차원 | 7.13 x 3.23 x 0.7 inches |
| 물자 물자 | 머리/텅스텐 탄화물 |
| 색상 : | 실버 그레이 |
| (주) | 두 배 커트 (Cross 커트) |
| 제품 무게 | 8.4 온스 |
| Product information | |
| 항목 모델 번호 | 5TC635 |
| 제품 정보 | 11000 rpm |
| Technical Details | |
| 제품 정보 | 뚱 베어 or 제품정보 or 기타 제품 or 관련 상품 or 뚱 베어 or 금속에 항구 or 강철 or 알루미늄 or 돌. 다이 그라인더 및 로터리 도구와 함께 작동합니다. metalworking를 위한 이상 or 회사 소개 or 뚱 베어 or 및 도구 유지 보수. |
| 부품 번호 | 5TC635 |
| 제품 정보 | Uncoated/가벼운 윤활 |
| 설치 방법 | 콜릿 너트 또는 3-jaw 척 |
| 조각의 수 | 55,000원 |
| 특수 기능 | 설치하기 |
| 측정 시스템 | 영어/표준 |
| Others | |
| 날짜 첫번째 유효한 | 2025년 or 6월 6일 |
| 제품 유형 | 절단 Burrs |