DC 12V 10A Relay Switch 1CH Wireless Remote Control Switch 433MHz Transmitter Receiver Momentary/Toggle Switch 12V Opener Garage Door keypad Universal Wireless ON Off (2* Control+2* Receiver)
9 sold in last 24 hours
- 🏠 [Control Voltage: DC 12V,Low volt Control High Volt Switch,Relay load: 10A 1V-250V,10A.
- 🏠[Multi-Function] Is the learn code switch, compatible and remove control code,randomly combination control
- 🏠 [Easy to install and use]. The wireless signal can pass through walls, floors and doors
- 🏠[Multi-function circuit switch] can be modified for multi-purpose circuit to control other circuit road.
- 🏠[wide applications range]The remote switches are used in industrial homes, farms, factories, offices, laboratories, supermarkets fields etc.
Estimated shipping
Select a product to estimate shipping.Descriptions:
Toggle: pin1+pin 2
Momentary:pin2+pin3
Latched: pin3
Remote Switch:
Transmitter
Channel:1CH
Remote Control Distance: 50 meter(open) in theory, 10%-50% in reality(In open environment,receiver antenna outside the box)
Encode: Fixed code, soldering
Operating Frequency: 433MHZ
Reciever
Channel:1CH
Decode: Fixed code, soldering
Power Supply (Operating Voltage): DC 12V
Relay: 10A/250V AC, 10A/125V AC, 10A/30V DC, 10A/28V DC Work Voltage Range of Relay: AC 110-240V or DC 0-28V
Sensitivity: -105 dBm
Operating Temperature: -40'C~+80'C
Working way:
Toggle/Self-Lock: Press->On; Press again->Off
Press one button for one time is working/ON. Press the same button again is stop/OFF.(1 channel switch(receiver) need 1 button remote control (transmitter). Latched/Inter-Lock: Press->On; Press other button->Off
Press one button is working/ON, press another button is stop/OFF. (1 channel switch( receiver) need 2 buttons remote control (transmitter).
Momentary/Jog: Press and hold->On; Release->Off
Keep pressing one button is working /ON. Loosen your finger is stop/OFF. (1 channel switch(receiver) need 1 button remote control (transmitter).
Learn code and Remove Code
1. Learn: Press the learning code, the indicator from on to off, loosen your finger, press any button of the remote control, the indicator flash 2 times and off, it mean you learn it successfully .
2. Remove: Press the learning button about 8 seconds, the indicator turn on to off, it means the Code had been removed successfully.
Package:
1/2 x Remoter control transmitter( CR 2016 button cell battery Includes )
1/2/3/4 x receiver
1X Manual
Package Dimensions
4.57 x 2.76 x 1.54 inches; 4.66 ounces
| Main Specification | |
|---|---|
| 접촉 물자 | (주) |
| 접촉 유형 | 현재 위치 |
| 현재 등급 | 10개 Amps |
| 작동 전압 | 12 볼트 |
| 이름 * | Solder |
| 회로 유형 | 관련 제품 |
| Actuator 유형 | 푸시 버튼 |
| 주요 특징 | Mangood |
| Product information | |
| Operation Mode | Automatic |
| Connector Type | Wireless |
| Others | |
| 제품 유형 | Electronic Switch |