5 Star Knobs Kit Threaded Knob Washer Bolt with Knob Jig Knobs 4-Pack
8 sold in last 24 hours
- TIGHTEN & ADJUST JIGS, FIXTURES, FENCES: The DCT | 5 Star Knob T Track Knobs Kit with Bolts & Washers 4-Pack is a package of screw-on clamping knobs that can be used on your existing saw fence, drill press, lathe, routing jig, fixture, feather board, or anywhere else that a 1/4-Inch-20 internal thread is required; Many 3/4-inch wide x 3/8-inch deep (19.1mm x 9.5mm) T-tracks will not only accept this knob set but will allow you to use the 1/4-inch T-bolts
- PERFECT SIZE: Knobs have a 2-inch diameter and 1-inch height (5.1cm x 2.5cm); T track knob threading has 1/4-inch (6.4mm) diameter and 20 threads per inch (if you turn a nut 20 revolutions it will move 1 inch); Bolts and washers are 1/4”-20 x 1-1/2-inch; Works with any material that is less or equal to 1-inch in thickness or any T-track that accepts standard 1/4-inch bolt heads
- EASY TO USE: Insert the bolt into the T-Slot head down with the screw facing upwards, place the washer on the threaded bolt facing upwards, thread the T knob onto the bolt, then lock the entire unit in place on your T-track; Ergonomic design of this plastic knob set allows for easy adjustment and tightening with maximum control and agility without the use of additional tools
- BUILT TO LAST: T knobs package includes plastic knobs that are constructed from polypropylene plastic with molded-in brass insert that will not strip; Bolts and washers constructed from steel
- PACKAGE CONTENTS: Tightening knob kit includes (4) T track knobs (1/4”-20 threaded knobs), (4) bolts, and (4) washers for your convenience; This T bolts and knobs pack is for use with a hold down clamp (sold separately)
Tags |
Estimated shipping
Select a product to estimate shipping.About the DCT 5 Star Knobs Kit
Tighten and adjust your saw fence, drill press, lathe, routing jig, fixture, or feather board with the DCT | 5 Star Knob Jig Knob Kit with Bolts and Washers 10-Pack.
A Closer Look
EASY TO USE
To use on your T-track, insert the head of a bolt into the track with a washer and align it with the threaded knob. This tool knobs kit is used in furniture decoration, electronic equipment, mechanical equipment, and more.
NO MORE STRUGGLE
Use on a cross stitch scroll frame so you no longer struggle with tiny wing nuts that hurt your fingers.
READY FOR YOUR TOOL KIT
These industrial knobs can be used for a canoe anchor system and motor mount or even as replacement knobs when your dog gnaws at your mower controls. The possibilities are endless! This T track hardware kit includes ten (5/16”-18 ) 5-star thru knobs with bolts and washers to best suit your needs.
Product details
| Main Specification | |
|---|---|
| 금속 유형 | 합금 강철 or —— 크리스 |
| 관련 제품 | Knob or Bolt |
| 주요 특징 | Deadwood Crafted Tools |
| 단위 수 | 1 개 |
| 손잡이 물자 | 플라스틱 |
| 외부 끝 | —— 크리스 |
| 손 방향 | 큰 가슴 |
| 주요 특징 | DCT |
| UPC의 | 811498038716 |
| 상품번호 | 1명 1명 |
| 제품 정보 | 주요 특징 |
| 제품 깊이 | 3/8 inches |
| 이름 * | 이름 * |
| 색상 : | 한국어 |
| 글로벌 무역 식별 번호 | 00811498038716 |
| 제품 무게 | 2.5 마일 |
| Product information | |
| 고객 패키지 유형 | 표준 포장 |
| Technical Details | |
| 물자 유형 | 플라스틱 or 합금 강철 |
| 제조업체 부품 번호 | 8716 |
| 핸들 부착 메커니즘 | Threaded |
| 손잡이 유형 | 사이트맵 |
| 핸들 호환성 | (주) |
| Item details | |
| 모델 번호 | 8716 |
| Style | |
| 작풍 이름 | 산업 분야 |
| 끝 유형 | 제품정보 |
| Features & Specs | |
| 추가 기능 | 설치하기 or 뚱 베어 |
| Others | |
| 제품 유형 | Jig Accessories |
| 품목 차원 L x W | 4.7"L x 5"W |